Custom signs and printed graphics for Phoenix-area businesses and organizations

Custom A-Frame & Sidewalk Signs

Portable A-frames with replaceable 24″ × 36″ inserts—planned around message distance, two-way traffic, storage, and the conditions staff will monitor each day.

Single- or double-sided layouts put the message in one or both pedestrian approaches.
Removable inserts let the same frame rotate menus, promotions, directions, or seasonal graphics.
Built-in ballast can add stability, but placement and weather still need daily judgment.
The foldable frame is intended for portable placement and storage rather than permanent installation.

More about this sign Portable Does Not Mean Place It Anywhere

A-frame signs earn attention by meeting pedestrians where a decision happens: outside a café, at a lobby turn, beside an event entrance, or before a parking split. The strongest panels use one clear action, a bold visual hierarchy, and enough contrast to read while someone is moving.

The frame is only part of the brief. The customer supplies the viewing direction, verified available footprint, surface slope, wind exposure, operating routine, and whether the display sits indoors, on private property, or in a regulated public area.

Ballast may improve stability, but it does not make every outdoor condition safe. Staff should be able to monitor the sign, preserve an accessible route, and move it inside when weather, crowds, or site operations call for it.

For the quote, send the number of frames, one- or two-sided artwork, replacement-insert quantity, placement photos, and required in-use date. If a landlord or venue has sign criteria, include those before the proof is built.

At a glance

What to know: A-frame signs, also called sidewalk or sandwich board signs, are portable displays with replaceable printed panels. In Phoenix-area use, a short message and a verified clear path are only the start: staff must also manage hot surfaces, direct sun, dust, wind, seasonal storms, ballast, and indoor storage.

Key takeaways

Design for a 24″ × 36″ insert with a headline that can be understood in a few steps, not a full menu of fine print.
Tell us whether you need one or two printed faces and whether future replacement inserts should share the same layout.
Before placing an A-frame anywhere in the Phoenix area, verify the property, venue, landlord, and local-jurisdiction rules for that exact location; this page does not establish placement approval.

Popular Uses

Restaurant and café specials that can be reduced to one readable message.
Retail storefront promotions placed where property and local rules allow.
Trade shows, check-in areas, and indoor lobbies needing portable wayfinding.
Parking, school, campus, and venue directions that change by event or day.
Temporary caution messaging when the wording and placement match the site safety plan.

Choose Your Sign Options

Sign details

Frame Size: 46.125″ H × 27″ W × 3.125″ D
Insert Size: 24″ × 36″
Ballast: Built-in cavity; fill and use according to the frame instructions and site conditions
Insert Material: 3 mm PVC
Frame Color: White
Care: Clean with compatible products and store indoors when the display is not in use
Finished order: Printed insert or inserts; the frame and any accessory are included only when expressly listed in the written estimate

Available options

Single-sided or double-sided graphic layouts.
Heavy-duty Signicade Deluxe plastic frame configuration shown on this page.
Replacement 3 mm PVC or 4 mm corrugated plastic inserts quoted separately.

Preparing files? Start with the artwork setup guide.

What We Need for Your Quote

Details to send

Final dimensions & specifications

Approve the final 24″ × 36″ insert orientation, printed sides, quantity, and any replacement-insert specifications.
Verify that the 46.125″ H × 27″ W × 3.125″ D frame footprint fits the intended location and preserves required doors, sightlines, and paths of travel.
Provide the customer-approved placement, viewing directions, surface slope, wind exposure, daily setup routine, and storage plan.

Artwork files

Supply exact approved copy and vector PDF, AI, EPS, or SVG artwork when possible; high-resolution JPG or PNG files can be reviewed.
Approve orientation, type size, contrast, colors, safe margins, printed sides, and every replacement-insert variation before production.

Order preparation

For your installer

The finished order contains the printed insert or inserts and only the frame or accessories expressly listed in the written estimate.
The customer handles final placement approval, frame assembly, ballast, daily setup, monitoring, removal, cleaning, and storage according to the frame instructions and site conditions.

Plan These Separately

Site surveys, field measurements, placement selection, permit or accessibility review, and approval from a landlord, venue, property, or jurisdiction.
On-site setup, ballast filling, installation labor, monitoring, relocation, storage, repair, or maintenance.
A guarantee that ballast makes the display safe in every wind, crowd, slope, or operating condition.

How We Make Your Sign

1) Supply the approved use plan

Send the frame quantity, one- or two-sided need, customer-verified footprint, location photos, viewing directions, daily routine, and any landlord or venue criteria.
2) Supply the message

Upload vector PDF, AI, EPS, or SVG artwork when possible; high-resolution JPG or PNG files can also be reviewed.
3) Approve the proof

Confirm panel orientation, safe margins, colors, spelling, and how the message reads at the intended distance.
4) Print and prepare the order

The approved inserts are printed and finished, and any frame or accessory listed in the written estimate is included with the finished order. The customer confirms permitted placement, ballast, monitoring, and storage.

Questions About This Sign

Do you offer metal A-frames?

The configuration described here uses a heavy-duty Signicade Deluxe plastic frame. Share the application if you need a different frame style so availability and fit can be reviewed.

Will my sign fade, warp, or scratch?

Outdoor exposure, cleaning, handling, and storage all affect the frame and printed insert. Bring the sign indoors when it is not in use, avoid incompatible cleaners, and replace an insert when wear affects readability.

Do you offer other sizes?

This page is built around a 27″ × 46.125″ frame with a 24″ × 36″ insert. If that footprint does not fit the site, send the available space so another sign format can be considered.

How do I stabilize the sign in wind?

Use the built-in ballast cavity according to the frame instructions, but do not rely on ballast alone. Monitor conditions and move the sign indoors whenever wind, crowds, slope, or placement makes it unsafe.

What material are the inserts, and what do replacements cost?

Replacement panels can be quoted in 3 mm PVC or 4 mm corrugated plastic. Cost depends on material, quantity, printed sides, artwork, and current order details.