602-613-8788 Email info@valleysignguys.com
Quick Quote
Finished red Safeway Drive Up and Go wall graphic behind shopping carts
Historical installation of a red Drive Up and Go wall graphic in a Safeway floral aisle
Large hand-painted HDR logo mural on an exterior wall

Custom signs and printed graphics for Phoenix-area businesses and organizations

Wall Graphics, Mural Panels & Paint Masks

We make printed wall graphics, rigid mural panels, contour-cut pieces, stencils, and paint masks for Phoenix-area businesses and organizations.

  • Produce photographic murals, oversized logos, typography, patterns, directional elements, and repeatable branded wall pieces.
  • Match the approved execution plan to adhesive graphics, rigid printed panels, contour-cut pieces, stencils, paint masks, or a documented combination.
  • Derive panel sizes, seams, overlaps, cut paths, orientation, and sequence from verified dimensions and approved placement files.
  • Preflight scale, image detail, vector paths, colors, crop, panel transitions, labels, and finishing clearances.
  • Have your on-site graphics provider verify the wall, choose the application material, prepare the surface, and handle application or painting.
More about this sign Wall Graphic and Mural Options How to order graphics for a prepared wall

A photographic image, an oversized logo, and a repeating pattern can become adhesive graphics, rigid panels, or a stencil-and-paint-mask package. The visual idea may be shared; the production files are not.

Printed graphics carry supplied color and image content. Stencils and paint masks transfer approved vector shapes for execution by a painter. Rigid panels move the artwork onto customer-specified sheets rather than directly onto the wall.

You and your on-site provider choose the method after evaluating the actual surface. Production begins only when their dimensions, placement map, material direction, and cut or panel instructions are ready.

At a glance

What to know: Send your artwork, verified finished dimensions, quantity, orientation, and a placement or panel map when available. Valley Sign Guys makes the printed graphics, panels, stencils, or paint masks in the quote; the customer, muralist, or installer checks and prepares the wall and handles on-site application or painting.

Key takeaways

  • Give every wall, panel, graphic section, stencil, and mask a verified finished size and an approved origin, orientation, and sequence.
  • Have you or your installer settle wall condition, paint cure, texture, moisture, repairs, preparation, adhesion testing, and material suitability.
  • Supply vectors for logos, type, contour cuts, stencils, and masks; supply adequately detailed raster art for photographic or illustrated murals.

Choose What You Need

What we can make

Printed graphics
Printed adhesive wall graphics, printed-and-cut logos and shapes, repeat patterns, campaign graphics, and multi-panel murals
Rigid output
Printed mural or feature-wall panels produced to customer-approved panel sizes and layouts
Paint-production aids
Cut stencils and paint masks from approved vector paths for execution by the customer or their muralist or painter
What we work from
Verified dimensions, approved artwork, placement or panel map, orientation, sequence, and installer-selected material requirements
What is included
The printed, cut, numbered, or labeled pieces listed in the sign quote

Options to choose

  • Printed adhesive graphic, contour-cut graphic, rigid printed panel, stencil, paint mask, or an approved combination.
  • One wall, a coordinated set of walls, or repeated artwork versions supplied with a complete production schedule.
  • Full-wall image, isolated logo, repeating pattern, directional element, oversized typography, or segmented mural panels.
  • Customer-specified panel breaks, seams, overlaps, cut paths, bleed, orientation, and numbering.
  • A new campaign version produced from updated approved files while the customer manages removal and site work.

If the surface or application method is still uncertain, have your installer confirm the wall condition and chosen method before you approve the order.

What We Need for Your Quote

Your sign details

Final dimensions & specifications

  • Verified final width and height for every wall, panel, graphic section, stencil, or paint mask.
  • An approved placement or panel map showing origin points, orientation, sequence, seams, overlaps, obstructions, and cut boundaries.
  • Installer-selected material requirements and any documented production tolerances.

Artwork files

  • Vector artwork for logos, typography, contour cuts, stencils, and paint masks, with fonts outlined or supplied.
  • Adequately detailed raster artwork for photographs and illustrations at a documented final size or scale.
  • Approved colors, versions, bleed, crop, cut paths, and panel transitions.

Order preparation

For your installer

  • Request numbered panels, section labels, orientation marks, or a production map that corresponds to the approved placement file.
  • Ask for section numbers, orientation labels, or a layout reference based on your approved placement files to support your installer.

Packaging, grouping & labels

  • Describe any requested grouping, sequence, roll direction, panel protection, or labeling so it can be evaluated and written into the quote.

Plan These Separately

  • Site surveys, field measurements, substrate or adhesion testing, moisture review, and wall-condition diagnosis.
  • Removal, cleaning, repairs, surface preparation, priming, on-site layout, graphic application, and direct mural painting.
  • Installation labor or scheduling, access or lift coordination, on-site consultation, troubleshooting, and maintenance.
  • Placement design, mounting design, permits, code compliance, and approval of the application method selected by you or your installer.

Where This Service Fits

  • Designers and agencies supplying approved environmental-graphic files for production.
  • Installers ordering printed mural panels or contour-cut wall graphics to verified dimensions.
  • Muralists and painters ordering stencils or paint masks from final vector artwork.
  • Retail, office, hospitality, school, gym, campus, and event teams producing repeatable branded graphics.
  • Offices, retailers, restaurants, schools, nonprofits, and event spaces adding branded wall graphics or mural components.

How Your Sign Order Takes Shape

  1. 1) Choose the application method

    Have you or your installer approve adhesive graphics, rigid panels, contour-cut pieces, stencils, paint masks, or a defined combination for the actual wall.

  2. 2) Map every section

    Send verified dimensions, placement or panel maps, artwork, quantities, versions, material requirements, and cut, seam, overlap, orientation, or label instructions.

  3. 3) Approve the production map

    Review scale, crop, image detail, colors, cut paths, panel transitions, sequence, numbering, and each artwork version.

  4. 4) Produce for field execution by others

    Print, cut, finish, number, or label only the pieces in the quote, then prepare them for the customer, muralist, painter, or installer.

Questions About This Service

What can be produced for a wall or mural project?

Requests can include printed adhesive graphics, multi-panel murals, rigid printed mural panels, contour-cut logos and shapes, stencils, and paint masks. The quote confirms the exact material, method, dimensions, and finishing accepted for production.

How do I choose between printed graphics, mural panels, and paint masks?

The customer, designer, muralist, or installer should select the application method after reviewing the wall and project requirements. Printed graphics reproduce approved imagery, rigid panels carry a printed mural on customer-specified panels, and stencils or paint masks transfer approved vector shapes for painting by others.

Who tests and prepares the wall?

Your on-site graphics provider verifies the measurements, paint cure, texture, moisture, repairs, cleaning, preparation, adhesion, material suitability, and final application method. Send the resulting dimensions and material choice with your artwork.

Do you install wall graphics or paint murals on site?

No. We make the printed graphics, panels, stencils, or paint masks listed in your quote. Your on-site provider handles wall preparation, layout, application or painting, access, removal, troubleshooting, and cleanup.

What files are needed for production?

Provide verified final dimensions and an approved placement or panel map. Vector files are needed for logos, type, contour cuts, stencils, and paint masks; adequately detailed raster files can support photographic or illustrated graphics. Include colors, bleed, crop, seams, overlaps, orientation, and versions.

Can panels or graphic sections be numbered for my installer?

Request numbering, orientation labels, roll direction, or section mapping before quoting. The quote will confirm the available labels or section map; the installer still performs field layout and verifies fit.

Retail Wall Graphics View a past large-format wall-graphics project. Custom Decals Compare adhesive graphic formats when the surface and application are already known. Vinyl Lettering Choose cut lettering and simple vector graphics. Hand-Painted Signs Compare shop-produced painted sign formats with mural-production aids. Artwork Setup Prepare vectors, raster art, fonts, colors, bleed, and cut paths. For Your Installer See what dimensions, placement files, and labels to provide when someone else will apply the graphics.

Signs and Graphics for Phoenix-Area Businesses