Custom signs and printed graphics for Phoenix-area businesses and organizations

Replacement Sign Faces, Panels & Graphics

We make non-electrical replacement sign faces, rigid panels, tenant inserts, decals, and cut-vinyl graphics from confirmed dimensions and artwork.

Ask us to make acrylic faces, rigid panels, vinyl graphics, directional inserts, and other separable non-electrical sign parts.
Send original artwork when available, verified finished dimensions, construction details, clear photographs, and information about any sample.
Choose the material, thickness, opacity, color target, finish, cut shape, holes, edge details, orientation, and viewing sides.
Treat photographs as visual context, not proof of scale, material, fit, or an exact color match.
Your sign-service provider handles diagnosis, removal, measurement, electrical work, and reinstallation; we make the replacement component.

More about this sign How Replacement Sign Parts Are Matched What helps us match a replacement part

A replacement face can depend on thickness, opacity, viewing side, color, finish, cut shape, holes, edge clearances, and the opening of an existing cabinet or holder.

Original files and earlier order details are especially useful. A physical sample may clarify construction or color, while photographs help identify the part but cannot establish precise size or fit.

Once your sign-service provider identifies and measures the separable part, we use the supplied information to make the new face, panel, graphic, insert, or dimensional component.

At a glance

What to know: Tell us which face, panel, insert, decal, or dimensional piece you need. Send exact dimensions, original or replacement artwork, known material and finish details, quantity, and clear photographs, and we can quote the new component.

Key takeaways

Use dimensions taken from the removed component or confirmed by your installer, not image proportions or a rough estimate.
Send every useful reference you have: original artwork, earlier order information, material details, color target, photographs, and sample information. Contact us before shipping a sample.
Stay clear of loose, elevated, energized, or unstable signs and contact an appropriate sign-service or emergency provider when there is an immediate hazard.

Choose What You Need

What we can make

Faces and panels: Requests for replacement acrylic faces, printed rigid panels, inserts, overlays, or other separable sign faces
Graphics: Replacement printed graphics, decals, or cut vinyl from approved artwork, dimensions, orientation, and material requirements
Other components: Replacement directional inserts or separable dimensional elements that fit our current equipment and materials
Reference basis: Customer-supplied original files, verified dimensions, material and thickness information, photographs, color references, and sample details
Matching details: The material, finish, color target, cut details, and tolerances listed in the written sign quote

Options to choose

Make a replacement face, panel, insert, graphic, or separable component when the supplied dimensions and references are complete.
Use original artwork, rebuild from customer-approved replacement artwork, or evaluate a supplied reference package without promising an exact match.
Produce one component or a documented quantity of identical or versioned components.
Include customer-specified cut shapes, holes, edge details, opacity, orientation, and viewing sides when accepted in the proof and quote.
Request a revised material or finish when an exact original is unavailable, subject to customer approval before production.

Photographs can start the quote, but exact dimensions and known construction details are still needed because appearance alone cannot establish fit or guarantee an exact match.

What We Need for Your Quote

Your sign details

Final dimensions & specifications

Verified finished width, height, thickness, shape, corner details, viewing sides, orientation, and quantity.
Exact hole sizes and locations, cutouts, clearances, edge details, or insert dimensions approved by you and your installer.
Material, opacity, finish, exposure, and fit requirements identified from original records or a qualified field assessment.

Artwork files

Original vector or print files when available, or customer-approved replacement artwork at final size or a documented scale.
Final wording, colors, fonts, logos, cut paths, print orientation, and every required version.
Clear photographs, known production records, color references, and details about any physical sample available for review.

Order preparation

For your installer

Request part numbers, face orientation, version labels, or component identification before quoting.
Any dimensions or mounting-related cut details must come from you or your installer and remain their responsibility.

Packaging, grouping & labels

Describe any requested face protection, grouping, orientation, or labeling so it can be evaluated and listed in the sign quote.

Plan These Separately

Site visits, field diagnosis, field measurements, condition assessments, on-site consultations, and compatibility testing of the existing sign.
Removal, repair, patching, cleaning, refinishing, maintenance, troubleshooting, and reinstallation of existing sign systems.
Electrical diagnostics or work, illuminated-cabinet service, structural review, mounting design, engineering, and hazardous or emergency work.
Permits, code or accessibility compliance, access planning, lift coordination, and installation labor or scheduling.

Where This Service Fits

Sign installers ordering a verified replacement face, panel, insert, graphic, or separable component.
Businesses and property teams replacing outdated branding after a qualified provider has documented the existing component.
Designers and agencies supplying approved replacement artwork for an existing sign format.
Facilities teams ordering repeated directional inserts or panel versions from an approved schedule.
Businesses, schools, churches, property teams, and facilities teams replacing a documented non-electrical sign piece.

How Your Sign Order Takes Shape

1) Identify and measure the part

Have your sign-service provider identify the separable component and send exact dimensions, construction details, photographs, condition context, and exposure information.
2) Send artwork and references

Add original files or approved replacement artwork, known material and thickness, color and finish targets, quantity, and information about any physical sample.
3) Confirm the replacement details

Review the size, material, opacity, color target, finish, cut shape, holes, orientation, versions, tolerances, and any stated limits on matching the original.
4) We make and label the component

We produce the approved face, panel, graphic, insert, or other separable part and label it for the correct sign or viewing side.

Questions About This Service

What does your replacement-sign service include?

We make a new non-electrical face, panel, graphic, insert, or separable component from the dimensions and references you provide. Your sign-service provider diagnoses the existing sign, makes it safe, removes and measures the old part, and installs the replacement.

What replacement components can I request?

You can request a quote for acrylic faces, printed rigid panels, vinyl graphics, directional inserts, and other separate components supported by supplied files, sample information, and verified dimensions. The quote confirms whether the exact request is feasible.

Can you reproduce a component from photographs?

Photographs can explain appearance and context, but they do not establish final dimensions, material, thickness, opacity, color, cut details, or fit. Original files, verified dimensions, earlier order information, and an approved sample provide a stronger basis; the quote will state what can and cannot be matched.

Who removes, measures, and reinstalls the existing sign?

You or your installer handles diagnosis, removal, final measurement, site verification, mounting decisions, access, and reinstallation. We use the measurements and fit information they provide to make the replacement component.

Do you service illuminated, neon, or electrical signs?

No. Electrical diagnostics, wiring, energized work, neon, transformers, illuminated-cabinet service, and electrical decisions belong with an appropriately qualified provider. We can still quote a separate non-electrical face or panel made from verified specifications.

What is needed for a replacement-component quote?

Send verified final dimensions, material and thickness information, original or approved replacement artwork, quantity, photographs, color and finish references, cut shapes, holes, orientation, viewing sides, exposure, tolerances, and details about any sample available for review.

Window Decals Compare printed replacement graphics for approved glass applications. Vinyl Lettering Compare cut replacement lettering and simple vector graphics. Acrylic Signs Review acrylic material, thickness, print, and cut decisions. Custom Aluminum Signs Compare printed solid-aluminum replacement panels. Dibond Signs Compare aluminum-composite replacement faces and panels. Dimensional Signage Review separable dimensional letters and logo components. For Your Installer See what verified dimensions and fit details to provide when someone else will install the replacement.

Signs and Graphics for Phoenix-Area Businesses

Valley Sign Guys makes non-electrical replacement sign faces, panels, inserts, and graphics for Phoenix-area businesses and organizations. Send the component details, exact dimensions, artwork, quantity, and clear photos for a quote.

All Phoenix-Area Guides Phoenix Mesa Glendale Goodyear